20-00011 Generation 1 wheel bearing set, front and rear
The Gen 1 set makes it possible and very easy to replace front and rear wheel bearings on passenger cars directly on the vehicle in 15-30 minutes.
The Set comes with a fixing late that is universal for bearing removal feet. It can be used with feet to remove and replace Generation 2 and Generation 3 wheel bearings.
Designed to work with the hub on the car and to fit most passenger cars with Generation 1 wheel bearings.
Allows access when the knuckle has uneven surfaces or fragile brake shields behind the hub.
No more time-consuming struggle in the shop press.
No need for alignments or ADAS calibrations to correct thrust angle issues
Generation 2 Compact wheel bearing (HBU 2.1) extension set #20-00012
This highly engineered set of bearing removal and replacement tools makes it possible to replace the wheel bearing directly on the vehicle.
This set and method will demount and correctly install Generation 2 Compact wheel bearings (HBU 2.1).
The tool set has been engineered to hold the bearing correctly so during installation there is little chance of cracking the bearing cage. This is accomplished by pressing in the bearing only using the outside of the bearing housing.
Using a standard press greatly increases the chances of cracking the bearing cage on this type if bearing. (type 2)
No wheel alignment or ADAS updates are needed after replacement.
The full set contains several universal tools that are used for many other jobs.
The job is made directly on the vehicle in 15 minutes.
Foot pump #1036
Premium Air over hydraulic foot pump has variable speeds for fine control.
The foot pumps maximum pressure is 10,000 PSI. It is used with all of our hydraulic cylinders.
The foot pump comes with a pressure gauge.
Equipped with a 7 ft. hose and drip-free quick disconnect female coupling.
Oil tank holds 1/3 gallon (1.3 Liters)
18 Ton RAM #20-03003
18 tones pressing and pulling power.
“light weight” hydraulic cylinder in a compact size only 6 lbs (2.8 kg).
Automatic piston return.
Designed for everyday use in auto repair shops.
Can be used with all of our passenger car tools and carriage beams M10-M22 with the proper adaptor.
The cylinder's hydraulic pressure can be combined with punching force from the blow of a hammer. You MUST use the punching socket #1086-6 provided.
